Instructions - Spyder Type Male Character

[Fitzwilly]

Spider Balloon Man

This month in the basement you will learn a quick body for your favorite 5" imprint balloon.

Let's start with a Spider Man Body that gives you the Blue stripes on his sides.
You will need
one Red 260
one Dark Blue 260
one 5" Spiderman Face

Start by inflating the Red 260 leaving a five to six inch tail. Make a 1" bubble followed by a 2" to 3" loop twist for a hand. Make a 6" bubble followed by two 1" ear twists for his neck. Make two more 6" bubbles locking them together at the neck like so. Make one more 6" bubble and another hand as you did before.


Inflate the Dark Blue 260 leaving a four inch tail. Make a 1" bubble followed by a 3" loop for a foot. Make a 6" bubble for a leg and wrap it into and around the two red bubbles at the waist. Make a 6" bubble and wrap it at the neck then one more 6" bubble for the side and twist it around the waist. Make another 6" bubble for the other leg and make one more foot as you did before. Inflate the 5" Spiderman face to about 3" and tie it. Squeeze the air towards the face to make it bigger. Tie it to the two ear twists that make the neck.